+8618149523263

Components of USB4

Jan 24, 2022

Components of USB4

The main components are three routers (Router), adapter (Adapter) and TMU (Time Management Unit, time management unit).


Router: Convert the tunnel protocol into USB4 packet transmission, and use TMU for time synchronization. It is mainly detected and managed by the built-in Connection Manager of the USB Host.


Adapter: The main function is a medium for the router to communicate with external components, and to perform protocol conversion.


TMU: Use a distributed time management unit (TMU) to synchronize time between routers.


Before, Liuyuanjun summarized the USB4 transmission process in detail as follows:


1. Encapsulate USB 3.2, DisplayPort and PCIe data into one packet through tunneling protocol;


2. The host router selects the tunnel protocol sending path and sends it through the USB4 structure;


3. The slave router selects the tunnel protocol receiving path and receives it through the USB4 structure;


4. Decode the data packets of the tunneling protocol and separate out the USB 3.2, DisplayPort and PCIe data.


The following describes the transmission method of USB4 data in the USB4 structure by using the vehicle driving in the lane. As shown below:

_20220124101130

Xa kev nug